By ChiefArchitectSoftware.net Editorial Team · Published 2026-10-28 · Updated 2026-10-28
Confirm finished levels
Establish finished floor elevations at both ends of the run, including floor build-ups that could change a final riser. Verify the modeled levels before changing stair parameters.
Check the complete walking path
Review landings, door swings, and adjacent circulation. A staircase that fits in plan view may still create a conflict at the top, bottom, or intermediate landing.
Evaluate headroom and guards
Use building sections and elevations to check available space. Requirements depend on the jurisdiction and design; confirm numerical thresholds with current applicable codes.
Keep notes coordinated
Make plan, section, and stair-detail annotations agree on direction, floor level, and dimensions. Remove stale manual notes after geometry revisions.
Use qualified review for construction
Have a qualified professional check structural and life-safety requirements. Visualization software does not approve a stair for code compliance.
Practical final checklist
- Save a dated backup or review copy before changing an active project.
- Check information against the relevant current software documentation and local project requirements.
- Test changes on a representative file, then inspect the resulting drawings and exports.
- Record unresolved questions and obtain qualified professional review when the deliverable requires it.
Related workflows
Continue with Floor plan workflow, Printing to scale, Backup and recovery.