By ChiefArchitectSoftware.net Editorial Team · Published 2026-10-28 · Updated 2026-10-28
Check geometry before annotations
Verify wall alignment, thickness, and the position of openings in the model. A dimension that displays the expected number can still reference the wrong face or point.
Identify what each dimension measures
Distinguish finished-face clearances, framing dimensions, centerlines, and overall outside dimensions. Make this convention explicit when another trade will rely on the sheet.
Cross-check critical locations
Pay special attention to stairs, bathrooms, corridors, cabinet runs, and structural openings where small discrepancies have practical consequences. Confirm relevant constraints with the appropriate drawings and professionals.
Resolve conflicting strings
Check whether repeated dimensions agree when a room appears on multiple drawings. Remove obsolete manual notes after geometry changes instead of silently carrying them forward.
Verify scale on exported sheets
Review paper size, viewport scale, and print scaling separately. Test one known dimension on a PDF or printed sheet before releasing a package.
Practical final checklist
- Save a dated backup or review copy before changing an active project.
- Check information against the relevant current software documentation and local project requirements.
- Test changes on a representative file, then inspect the resulting drawings and exports.
- Record unresolved questions and obtain qualified professional review when the deliverable requires it.
Related workflows
Continue with Floor plan workflow, Printing to scale, Backup and recovery.